Yorkville M1610-2 Series 2 10-Channel 1600W Powered Mixer

Compact, rack- or wedge-mountable PA mixer with dual 800W amps, onboard DSP & graphic EQs
The Yorkville M1610-2 brings professional power and processing in one box. Six combo XLR/¼″ mic-line inputs (ch 1–6), two Hi-Z instrument jacks (ch 5/6), and two stereo line pairs (7/8, 9/10) feed dual Class-H amplifiers—800 W RMS each into 4 Ω—directly to SpeakON or banana speaker outputs. Built-in 24-bit DSP delivers 16 effects (reverb, delay, chorus, flange, more), while dual 9-band graphic EQs and shelving filters let you shape mains and monitors independently. Its slanted steel/aluminum chassis doubles as a floor-wedge; add the optional rack-kit (sold separately) for rackmount installations.
 
Condition:
Excellent—straight, dent-free chassis with light paint wear on panel edges and minimal scuffs around the vent slots. All knobs, faders, LEDs, jacks, meters, and amplifier sections have been tested and function flawlessly.
 
Includes:
Yorkville M1610-2 powered mixer (no rack rails) and a Standard IEC power cable
 
Features:
10 channels:
Ch 1–6: XLR mic / ¼″ line inputs (ch 5/6 Hi-Z for guitar/bass)
Ch 7/8 & 9/10: stereo ¼″ line pairs with balance control
Dual 800 W amps: Class H power (4 Ω = 800 W, 8 Ω = 600 W)
Onboard DSP: 16 algorithms—reverb, delay, chorus, flange, pitch shift, more
Dual 9-band graphic EQs: Independent strips for mains and monitors, plus Hi/Lo shelving filters
Dynamics & routing:
Trim pot and “Set” LEDs per mono channel
Compressor on channels 1–6
Mute switches and level meters
Aux sends for effects and foldback
Outputs & connectivity:
Dual SpeakON 1+/1– + banana jacks for each amp
RCA tape/CD In & Rec Out
¼″ monitor output
Footswitch jack for effects bypass
Phantom power: Global 48 V for condenser mics
Form factor: Tilt-back wedge design; 3 U rackmount with optional kit
Dimensions & weight: 18.6″ × 11″ × 11″; ~31.3 lbs
 
Customer Review:
“This unit replaced my old rack of amps and processors. Plug-and-play power with great onboard effects—perfect for my mid-sized gigs.”
— ★★★★☆ K.R.
 
Frequently Asked Questions:
Q: Can I drive mains and monitors at the same time?
A: Yes—dual amps with separate EQs let you send differently processed signals to each.
Q: Is phantom power per channel?
A: No—it’s a global switch supplying 48 V to all microphone inputs.
Q: Are the effects routable per channel?
A: Yes—each channel has its own effects send and level control.
Q: Does it require active cooling?
A: The internal amps are fan-cooled; ensure adequate ventilation during use.